Geberit wall-mounted washbasin tap Brenta, battery operation

Technical data

• Battery type: Alkaline (1.5 V AA)
• Protection degree: IPX4
• Operating voltage: 3 V DC
• Operating pressure: 0.5-10 bar
• Recommended operating pressure with thermostatic mixer: 0.5-5 bar
• Recommended operating pressure with thermostatic mixer: 50-500 kPa
• Differentiated pressure CW/WW: ≤ 1.5 bar
• Maximum test pressure, water: 16 bar
• Maximum test pressure, air / inert gas: 3 bar
• Ambient temperature: 1–40 °C
• Storage temperature: -20 – +70 °C
• Water temperature, adjustment range with thermostatic mixer: 20-42 °C
• Maximum operating temperature, water: 60 °C
• Maximum operating temperature, water, short-term: 90 °C
• Flow rate at 3 bar: 5 l/min
• Calculated flow rate: 0.07 l/s
• Minimum flow pressure for calculated flow rate: 0.5 bar
• Interval flush, adjustment range: 1-168 h
• Interval flush, factory setting: 24 h
• Interval flush time, adjustment range: 5-200 s
• Interval flush time, factory setting: 5 s
• Product material: Brass chrome-plated / plastic

Application purposes

• For extracting tap water
• For public and semipublic areas
• For installation in Geberit elements for washbasins, wall-mounted tap with concealed function box
• For connecting cold and hot water (only for model with mixer or thermostatic mixer)
• For connecting cold or mixed water (only for model without mixer)
• For use with stainless steel bowls
• Model with mixer or thermostatic mixer not suitable for continuous flow heater, see technical data sheet “Washbasin taps with continuous flow heaters”
• For panelling thickness 10–50 mm

Characteristics 

• Automatic flush actuation
• Infrared user detection
• Self-adjusting IR sensor
• Vandal-resistant
• Volume flow control via tap aerator
• Temperature presetting via mixer (only for models with mixer or thermostatic mixer)
• Not possible to set just hot water or just cold water (only for model with mixer or thermostatic mixer)
• Thermostat according to EN 1111 (only for model with thermostatic mixer)
• Scald protection by limiting the water temperature to 42 °C (only for models with thermostatic mixer)
• Thermal disinfection according to DVGW W 551 possible
• Power supply by battery
• Battery sufficient to activate the water flow 200000 times
• Warning when the battery is low
• Economy mode can be set
• Water saving due to quick-response two-beam scanning technologyFunctions can be set and queried with the Geberit Service Handy
• Water saver program can be set
• Interval flush program can be set
• Continuous flush can be set individually
• Flush actuation can be deactivated via Geberit Clean Handy
• Various functions can be set manually
• With integrated check valve
• Functional unit with built-in basket filters

Scope of delivery

• Washbasin tap
• IR sensor with connection cable
• Control electronics
• Functional unit
• Battery compartment
• 2 alkaline manganese batteries type AA 1.5 V
• Tap aerator key
• Fastening material

To order additionally for Geberit wall-mounted washbasin tap Brenta, battery operation

• Geberit frame for washbasin
• Cover plate