Geberit washbasin tap Brenta generator operation, with exposed function box

Technical data

• Protection degree: IPX4
• Operating voltage: 3.2 V DC
• Operating pressure: 2-10 bar
• Differentiated pressure CW/WW: ≤ 1.5 bar
• Maximum test pressure, water: 16 bar
• Maximum test pressure, air / inert gas: 3 bar
• Ambient temperature:  1–40 °C
• Storage temperature: -20 – +70 °C
• Water temperature, adjustment range with thermostatic mixer: 20-42 °C
• Maximum operating temperature, water: 60 °C
• Maximum operating temperature, water, short-term: 90 °C
• Flow rate at 3 bar: 5 l/min
• Calculated flow rate: 0.07 l/s
• Minimum flow pressure for calculated flow rate: 0.5 bar
• Interval flush, adjustment range: 1-168 h
• Interval flush, factory setting: 24 h
• Interval flush time, adjustment range: 5-200 s
• Interval flush time, factory setting: 5 s
• Product material: Brass chrome-plated / plastic

Application purposes

• For extracting tap water
• For public and semipublic areas
• For installation in washbasins or washtops
• For connecting cold and hot water (only for model with mixer or thermostatic mixer)
• For connecting cold or mixed water (only for model without mixer)
• For use with stainless steel bowls
• For a flow rate of > 3 l/min
• Model with mixer or thermostatic mixer not suitable for continuous flow heater

Characteristics 

• Automatic flush actuation
• Infrared user detection
• Self-adjusting IR sensor
• Vandal-resistant
• Volume flow control via tap aerator
• Temperature presetting via mixer (only for models with mixer or thermostatic mixer)
• Not possible to set just hot water or just cold water (only for model with mixer or thermostatic mixer)
• Power supply from generator and rechargeable battery
• Self-sustaining power supply
• Warning when rechargeable battery’s state of charge is low
• Economy mode can be set
• Water saving due to quick-response two-beam scanning technology
• Functions can be set and queried with the Geberit Service Handy
• Water saver program can be set
• Interval flush program can be set
• Continuous flush can be set individuallyFlush actuation can be deactivated via Geberit Clean Handy
• Various functions can be set manually
• With integrated check valve
• When used at least 20 times per day on average for a duration of 4 s each, the washbasin tap works in a self-sustaining manner
• Functional unit with built-in basket filters

Scope of delivery for Geberit washbasin tap Brenta generator operation, with exposed function box

• Washbasin tap with IR sensor and connection hose
• Exposed function box with control electronics, functional unit and rechargeable battery for generator operation
• Reinforced braided hoses 3/8″
• Tap aerator key
• Fastening material